Digital pH sensor

BM WSPH1912

1W

Power supply: 12vDC
Produced by Budmore

This PH electrode, adopt international advanced  solid dielectric and large area PTFE liquid junction, no clogging, easy maintenance with long distance  reference diffusion path, extends electrode life greatly in harsh environments. This electrode is made of high quality low noise cable and makes signal output length greater than 40 meters or more, without interference.

  • It adopts the world –class solid dielectric and a large area of PTFE liquid for junction, non-block and easy maintenance.
  • Long-distance reference diffusion channel greatly extends the service life of electrodes in the harsh environment
  • It adopts PPS/PC casing and the upper and lower 3/4NPT pipe thread, so it is easy for installation and there is no need of the jacket, thus saving the installation cost.
  • The electrode adopts the high quality low-noise cable, which makes the signal output length more than 20 meters free of interference.
  • There is no need for additional dielectric and there is a little amount of maintenance.
  • High measurement accuracy, fast responding and good repeatability.
  • Proper operation shall make service life longer.
  •  

Model

WSPH1912

Measuring range

0-14pH

Temperature range

0~60 ºC

Compressive strength

0.6MPa

Slope

≥96%

Zero point potential

E0=7PH±0.3

Internal impedance

150-250 MΩ(25 ºC)

Installation size

Upper and Lower 3/4NPT Pipe Thread

Connection

Low-noise cable goes out directly

 

Contact

For all general enquiries and any questions regarding the categories listed above

Contact us